MAXIMUM WORKING LOAD 250 LBS.
MAXIMUM DESIGN LOAD 450 LBS.
Caution using this chair, it is low to the ground and requires some agility to use.
Please follow directions to use!
A: To use the chair open U-frame 90 deg. to main frame Open V-brace to maximum length of strap.
B. Stand directly over the chair and as demonstrated in the photo, squat down (good knees required) and GRIP main frame tubes with “BOTH HANDS” at points labeled. SIT in the sling DIRECTLY OVER the bottom cross tube. Lean back in the chair and slide to the most comfortable position.
Grip both side rails to sit !!!
Notes on Care
Paste wax applied to the aluminum frame will help prevent oxidation and will help the headrest snap on and off easily.
one drop of oil applied to the U-frame joints will help quiet any squeak that develops. Apply oil (1 drop) at bearing joint and rotate joint to work in wipe off excess.
Wash rip-stop nylon with mild soap & water and rinse well. (Do not submerge).
As with all nylon cloth excessive sun exposure will eventually damage the rip-stop nylon.